Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
9. Remove the 2 mounting screws from the structure.
A
A. 2 - Mounting screws
10. Using 2 or more people, lift the hood base beneath
the motor housing. Insert the hood base pins into the
housing lower slots. Once the four pins are inserted,
the hood base is supported.
A
11. Secure the hood base to the blower housing with 4 -
4.2 x 8 mm screws.
A. Hood base
B. Blower housing
C. 4 - 4.2 x 8 mm screws
12. Untie the base connector and plug with the blower
housing wire connector.
B
A
C
ENGLISH
19
Publicidad
