System Setting; Event Log; Demo - Fulgor Milano 700 Serie Manual De Uso Y Cuidado

11 - System setting

EN
With the oven on, press the
menu. This menu permits setting of parameters or special
functions. It also permits accessing the error events list.
1. Press the keys
the key.
START
2. Use this menu to change the following settings:
Press the keys
displayed from among the three available ones and
confi rm with the
START
EVENT LOGS
MAIN VOLTAGE

DEMO

Event Log

The menu permits checking any recorded errors. These codes
can be notifi ed to the after-sales service.
01 12/11/2015 07:06 CODE: F10305
02 17/11/2015 13:17 CODE: F10305
16
key to access the SYSTEM
SET
to select the sub menu and confi rm with
to select the item to be set or to be
key.
SYSTEM
OM 15
EVENT LOGS
Main Voltage
The purpose of this option is to set the type of appliance power
supply during installation. Press the keys
or 208V according to the mains supply in your home and then
confi rm with the key.
START
To avoid accidentally changing these settings, a double
confi rmation is required.
ADVANCED
MAIN VOLTAGE
Demo
The purpose of this function is to set the DEMO mode, which
makes the oven useless for cooking but automatically performs
a demonstration of functions.
1. Press the keys to select the item ON.
2. Confi rm with the key.
START
3. Press the key
ON/OFF
After about 30 seconds, the oven starts to operate in this mode.
To temporarily stop the DEMO function, simply keep any key
pressed for a few seconds until the oven switches to standby.
To start it again, press the
ON/OFF
To disable the function, enter the DEMO display page and set
OFF. Confi rm using the
START
NOTE: Once set, the function remains enabled even if the
oven is disconnected from the power mains.
DEMO
to select 240V
240
key.
key.
ON