Select The Fuel Source (Propane/Lpg) - iPower SUA8000iED Manual Del Propietário

Select the Fuel Source (Propane/LPG)

1. Turn the Multi-Switch to the "OFF" position.
2. Connect the LPG gas hose to the propane fuel
source. Connect the small end of the LPG gas
hose to the LPG regulator on generator and then
snug with a wrench to prevent leakage.
3. Fully open the Propane/LPG cylinder knob.
4. Turn the fuel source switch to the LPG
position.
5. Turn the Multi-Switch to the"START" position.
6a. Recoil start
6a.1 Pull recoil starter slowly until resistance is felt,
then pull rapidly.
6a.2. When engine starts,turn the Multi-Switch
in to the "RUN" position.
6b. Electric start
6b.1 Flip and hold the switch on the "START"
position. Engine will crank and attempts to start.
When the engine starts, release the switch to the
"RUN"
Page 19
position.