Garmin EDGE POWER MOUNT Instrucciones De Instalación página 6

8 Press down slightly and close the lever to lock the Edge device into the mount.
9 Connect the power pod cable
Required Cables
In order to complete the installation, you must purchase one of these compatible cables:
• Bosch power mount accessory cable
®
• Shimano ® power mount accessory cable
NOTE: Garmin recommends having a bike technician trim the compatible Shimano cable to the correct
length.
Wire Color
Red
Yellow
Blue
Black
• USB-A power mount accessory cable
Edge Power Mount Status LED
LED Activity Status
Solid green The power mount is connected to power, but it is not paired with an Edge device.
Flashing green The power mount is paired with the Edge device and is charging.
An error occurred. Unplug the power mount, and remove the Edge device. Plug the power
Flashing red mount in again, and install the Edge device. If the red flashing continues, contact Product
Support.
6
to the compatible power cable on your eBike
Wire Function
Power
Power
Ground
Ground
(Required Cables, page 6).
Installation Instructions