Adjusting The Bypass Valve - Palazzetti ELSA NEW Manual De Instalación Y Mantenimiento

7.3 Adjusting the bypass valve

The appliance is supplied with the bypass valve
(F) already adjusted against the box (Fig. 17). If
the adjustment is not adequate, recalibrate the
valve in order to obtain good combustion.
Proceed as follows:
1. Lift the deflector (D) and remove the
post-combustion plate (A) (Fig. 17).
A
Product images are for illustrative purposes only
2. Remove, in this order, the back wall (B), the
side walls (C) and the upper deflector (D)
(Fig. 18).
D
C
B
Product images are for illustrative purposes only
3. Loosen the screw (E) in order to place the
bypass valve (F) against the box (Fig. 19).
004779040 - 21/03/2022
ITALIANO ENGLISH
D
Fig. 17
C
Fig. 18
DEUTSCH FRANÇAIS
E
F
Product images are for illustrative purposes only
ESPAÑOL
Fig. 19
47