charging the battery
1
1.
Ground charging base:
after installing the ground charging base, connect the mains
charger to the charging base connector and insert the plug into an easily accessible
wall outlet. Fit the motor unit onto the base, ensuring that its contacts connect with the
base's contacts.
2.
Wall bracket: the wall bracket is not a charger. To charge your vacuum cleaner while
on the wall bracket, you must connect your vacuum cleaner to the mains using the
mains charger.
CHARGE LEVEL INDICATOR
The indicator light (8) located on the removable battery indicates its status.
Charging:
- Solid red means that the battery is charging.
- Solid blue means that the battery is fully charged.
In operation:
- Solid blue means that the battery is charged.
- Blinking red means that the battery needs to be charged.
WARNING: do not charge the battery more than
necessary to avoid reducing its lifespan
•
The appliance's performance may be reduced if you do not use the appliance for a long
time or if the battery is completely empty. You should fully charge (six hours) and fully
discharge the battery two to three times during initial uses.
Battery life after four hours of charging:
-
Slow speed: 25 minutes
-
Fast speed ("Boost" function): 12 minutes
Charging time for first three uses: 6 hours
Usual charging time: 4 hours
24
2
assembling/disassembling the appliance
Your appliance comes equipped with multiple brushes and accessories that help you
to clean different surfaces (including hard floors and pet hair) and hard to reach places
(cobwebs, tops of furniture, etc.).
You just have to change them based on what you need.
Insert the different items as shown in the diagram below. The brushes and accessories can
be inserted directly onto the body of the appliance, on the metal tube or on the flexible
hose.
25