Care And Maintenance - Joie i-Snug 2 Manual De Instrucciones

!
After installing the infant carrier module, always check that the
vehicle belts are routed correctly and securely fastened into the
vehicle buckle.
36
Use with Strollers
see images -
38 47
Your infant carrier module is designed to attach to certain Joie
stroller models featuring a special tray, armbar or calf support.
!
Please make sure your stroller can fit the infant carrier
module before purchasing it.
!
Never allow more than one baby in the travel system at one
time.
!
Please brake your stroller before assembling the infant
carrier module.
!
Check that the parts used to fix the infant carrier module are
securely fastened on the stroller.
!
Recline the stroller seat back to the lowest position.
Use with Joie Strollers
To assemble the infant carrier module on Joie strollers, please
follow these steps:
1. Place infant carrier module into stroller so notches in rockers
fit over edge of armbar, tray or calf support. The infant carrier
module will then automatically click into place.
41
!
If armbar has fabric cover, please detach the Velcro on
armbar cover first. -1
40
!
For the stroller with a special calf support, please adjust
the calf support to the vertical position, detach the
Velcro, and then lift the fabric cover.
11
& & &
38 39 40
-1
41
2. Use the straps on both sides of stroller to fix the child
restraint. & &
42 43 44
!
Try pulling the child restraint upwards to check that it is
fitted correctly.
To remove the infant carrier module, release the straps from
the infant carrier module, pull up the stroller release handle to
release the infant carrier module from tray, armbar or calf
support, and then lift infant carrier module out of stroller.
Please refer to & &
45 46 47

Care and Maintenance

!
After removing the foam wedge of insert
that the child cannot access it.
!
Please wash the seat cover and inner padding with cold water under
30°C.Please refer to the care label for instructions on cleaning the
fabric parts of the infant carrier.
!
Do not iron the soft goods.
!
Do not bleach or dry clean the soft goods.
!
Do not use undiluted detergents
wash the infant carrier module or base. It may cause damage to the
enhanced child restraint.
!
Do not twist the seat cover and inner padding in an attempt to dry. It
may leave the seat cover and inner padding with wrinkles.
!
Please hang dry the seat cover and inner padding in the shade.
!
Please remove the infant carrier module and base from the vehicle
seat if not in use for a long period of time. Put the enhanced child
restraint in a cool, dry place and somewhere your child cannot
access it.
.
,
please store it somewhere
,
gasoline or other organic solvent to
12