Technical Specification - HYGIPLAS F338 Instruction Manual

Technical Specification

Temperature range
Temperature reading accuracy
Resolution
Alarm Setting Resolution
Temperature display refresh rate
Display size
Battery
Cable length
Probe size
Thermometer dimensions
(h x w x d)
Ambient operating temperature
Troubleshooting
If the appliance ceases to function correctly, press and hold the red RESET button (situated on the
back of the appliance) using a pointed instrument.
Compliance
Dispose of depleted batteries in accordance with local regulations, within the
EC there are nominated disposal points for batteries.
The WEEE logo on this product or its documentation indicates that the
product must not be disposed of as household waste. To help prevent
possible harm to human health and/or the environment, the product must be
disposed of in an approved and environmentally safe recycling process. For
further information on how to dispose of this product correctly, contact the
product supplier, or the local authority responsible for waste disposal in your
area.
HYGIPLAS parts have undergone strict product testing in order to
comply with regulatory standards and specifications set by international,
independent, and federal authorities.
HYGIPLAS products have been approved to carry the following symbol:
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means,
electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of HYGIPLAS.
Every effort is made to ensure all details are correct at the time of going to press, however, HYGIPLAS reserve
F338_ML_130x210mm_v7_20211213.indb 3 F338_ML_130x210mm_v7_20211213.indb 3
-50 to 200°C / -58 to 392°F
• ± 3ºC/5.4ºF between -50~-20ºC/-58~-4ºF
• ± 1ºC/1.8ºF between -19.9~119.9ºC/-3.8~247.8ºF
• ± 2ºC/3.6ºF between 120~200ºC/248~392ºF
0.1º over full range
1º over full range
1 second
19(h) x 48(w) mm
1 x AAA 1.5v
1 metre
3.5 (Ø) x 125 (l) mm
116 x 78 x 28 mm
0~50ºC / 32~122ºF
the right to change specifications without notice.
EN
3
2021/12/13 11:05 2021/12/13 11:05