Menu Overview - ADURO P5 Serie Manual De Usuario

Start the stove via the app, by pressing the "ON/OFF" button on the remote or on the control panel.
As soon as the exhaust gases have reached a temperature of 80°C, the current status will switch to WORK.
Turn off the stove via the app or press and hold "ON/OFF" button the until the status switches to FINAL
CLEANING on the remote or the control panel.
The pellet insertion will stop immediately while more air will circulate through the combustion chamber in
order to clean the fire cave. This process will take 10-20 minutes.
In order to access the general programming menu, press the button "OK". Use the buttons "+" and "–" to
navigate through the menu and the button "OK" to confirm and enter. Use the buttons "+" and "–" to change
parameters within the selected menu. Press button "ESC" to go back and exit.

6.1 Menu overview

USER MENU:
SET CHRONO (adjust calendar function)
SET CLOCK (adjust the clock)
SELECT LANGUAGE
MODE STAND-BY (adjust if the stove should turn off or go to heat level 1 when the desired
temperature is achieved)
MODE BUZZER (alarm sound)
MENU DISPLAY (display settings)
INITIAL LOAD (this will start the augers)
STATE STOVE (shows status on stove, augers, and fans)
USER SETTINGS
SETTINGS TECHNIC
MENU USER SETTING:
SMOKE FAN SETTING (adjust smoke fan in the different heat levels)
AUGER SETTING (adjust augers in the different heat levels)
CONVECTION BLOWER SETTING (adjust convection fan in the different heat levels)
CHOOSE PROBE (choice of temperature probe)
6.2 Technical settings
IMPORTANT!
Menu SETTING TECHNIC is reserved only for authorised service partners. Any change in the parameters
that was made by unauthorized persons will result in the loss of warranty!
6. Settings
50