DAY HAND
DATE HAND
SECOND
Normal position,
watch runs
-Quick change of the date
( anticlockwise )
Day setting:
Turn the crown clockwise and
advance the hour and minute hands
till the day hand advances to the next
day. The day hand cannot be set
independently. Then turn back the
hour hand by about 4 hours, and
advance it again till the day hand
advances to the next day. Repeat the
same procedure and set the day hand
to the desired day of the week.
Time setting:
Set to the correct time. Be sure to
check that AM/PM is properly set.
Push crown back to position 1.