Publicidad
Idiomas disponibles
Idiomas disponibles
Option
Description
0
Add/change user or master code
To change master code, enter user number 000 followed by
the new master code (1 to 8 digits).
To add or change existing user, enter the user number (001
to 999), and a new user code (1 to 8 digits)
The new user is assigned to Relay 1
1
Set Relay 1 timer
To set toggle relay mode, press 00.
To set time in seconds, press 01 to 99.
The default time is 03 seconds.
2
Set Relay 2 timer
To set toggle relay mode, press 00.
To set time in seconds, press 01 to 99.
The default time is 03 seconds.
3
Assign output to the user
Enter the user number (001 to 999). Next, press 1 for Relay
1, and/or 2 for Relay 2.
4
Not used
5
Slave device
Press 2 to set ACL870FL-PB or ACL870SU-PB as a slave
device.
6
Buzzer, backlight, read range
Press 0 to set buzzer off, or 1 to on. Press 2 to for backlight
off, or 3 to on. Press 4 for backlight on key press, or 5 for
dimmed backlight.
The default values are the following: buzzer on, dimmed
backlight.
7
Not used
8
Delete all users
Press 999 to confirm.
9
Delete single user
Enter user number from 001 to 999.
Next, proceed from the step 4 above – press A to validate the
change.
Example
To assign user code 12345 to the user 5, and relay 2 that
activates for 4 seco nds, assuming default master code 000:
Press 000, B, then 0, 005, 12345, A. Press 3, 005, 2, A.
Press 2, 04, A. Press B to exit the programming mode.
Specifications
Power supply
12 to 24 V AC/DC
Current consumption
max. 70 mA
Outputs
1 relay: 2 A at 24 V AC/DC
User capacity
1000
PIN length
1 to 8 digits
RTE inputs
1
Buzzer, backlight control
Via menu settings
Tamper
Yes
Door open time
0 to 99 s, or toggle (on/off mode)
IP
IP65
−20 to +50°C, without condensation
Operating Temperature
4 / 16
Firmware upgrade
Via RS485 converter
30-second lockout after 8 consecutive
Security
invalid PINs
Regulatory information
PLACED ON THE MARKET BY:
Manufacturer
Carrier Fire & Security Americas Corporation, Inc.
13995 Pasteur Blvd
Palm Beach Gardens, FL 33418, USA
AUTHORIZED EU REPRESENTATIVE:
Carrier Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, Netherlands
Product warnings
THESE PRODUCTS ARE INTENDED FOR SALE
and disclaimers
TO AND INSTALLATION BY QUALIFIED
PROFESSIONALS. CARRIER FIRE &
SECURITY CANNOT PROVIDE ANY
ASSURANCE THAT ANY PERSON OR ENTITY
BUYING ITS PRODUCTS, INCLUDING ANY
"AUTHORIZED DEALER" OR "AUTHORIZED
RESELLER", IS PROPERLY TRAINED OR
EXPERIENCED TO CORRECTLY INSTALL FIRE
AND SECURITY RELATED PRODUCTS.
For more information on warranty disclaimers and
product safety information, please check
https://firesecurityproducts.com/policy/product-
warning/ or scan the QR code.
Certification
Carrier Fire & Security hereby declares that this
device is in compliance with the applicable
requirements and provisions of the Directive
2014/30/EU and/or 2014/35/EU. For more
information see firesecurityproducts.com or
www.aritech.com.
REACH
Product may contain substances that are also
Candidate List substances in a concentration
above 0.1% w/w, per the most recently published
Candidate List found at ECHA Web site.
Safe use information can be found at
https://firesecurityproducts.com/en/content/intrusi
on-intro
2012/19/EU (WEEE directive): Products marked
with this symbol cannot be disposed of as
unsorted municipal waste in the European Union.
For proper recycling, return this product to your
local supplier upon the purchase of equivalent
new equipment, or dispose of it at designated
collection points. For more information see:
recyclethis.info
Product
Please consult the following web link to retrieve
documentation
the electronic version of the product
documentation.
This link will guide you to the EMEA regional
contact page. On this page you can request your
login to the secured web portal where all manuals
are stored.
https://firesecurityproducts.com/en/contact
Contact information
firesecurityproducts.com or www.aritech.com
P/N 466-5611-ML • REV A • ISS 30JUL21
Publicidad
