Important Safety Instructions; Power Supply; Special Functions - ItsImagical my home dvd Manual Del Usuario

Ocultar thumbs

Contenido

Idiomas disponibles

Important recycling information:

This mark means that this product should not be thrown away with

organic waste within the EU. To prevent damage to the environment

or to human health, recycle it responsibly to contribute to the re-use

of material resources. To dispose of the old device, use the collection

systems available or contact the company where you bought it so they

can recycle it correctly.

2. IMPORTANT SAFETY INSTRUCTIONS

2.1. Inserting and removing the disc

Insert the disc into the player in the correct position with the printed side

facing outside.

2.2. Important note

Due to the fact that the disc will be spinning at high speed when playing,

do not use damaged discs nor glue or paper to repair them as this will

damage the product mechanism.

2.3. Do not hit or knock the product when it is in use

The disc will be spinning at high speed when playing, do not hit or shake

the product as this will damage the disc and the product mechanism.

2.4. Handling the product

When moving the product, ensure the disc has been removed, switched

oﬀ and the cable disconnected. Avoid blows and brusque movements

when moving the device.

2.5. Storage

Do not put pressure on or squash the product. Store the product away

from insecticides or volatile substances. Avoid long periods of contact

with rubber or nylon, these substances may discolour or damage the

product surface. Place the product on a ﬂ at, stable and well-ventilated

surface. Do not place the product in rooms with high temperatures,

dampness, dust or direct sunlight. When it is being moved long distances,

wrap it properly to avoid scratches or blows.

2.6. Cleaning the product and the screen.

Normally, clean using a damp cloth and a neutral detergent if there are

stubborn stains, then dry.

Turn oﬀ and unplug the product before cleaning.

Alcohol, diluent, benzene and other chemical agents can damage the

surface ﬁ nish. Use a soft cloth, like a glasses cloth, when cleaning the

LCD screen.

Not recommended for children under the age of 3.

Only use with the adaptors included in the box.

The power adapter is not a toy.

Disconnect the adaptors before cleaning with a cloth.

Check the adaptors regularly paying attention to the cable, the

connectors, the cover and other parts and, if damaged, do not use until it

has been repaired.

Do not connect to more than one power source.

3. Contents

3.1. DVD Player

3.2. Remote control.

3.3. Power adaptor

3.4. Microphone

4. BUTTONS AND PARTS

4.1. Handle

4.2. Open

4.3. Control

4.4 LCD screen

4.5. PLAY/PAUSE

4.6. STOP

4.7. ENTER: conﬁ rm selection

4.8. AUDIO: when playing a VCD, press to change the audio channel /

when playing a DVD, press to change language.

4.9. ON/OFF

4.10. Speaker

4.11. Microphone volume

4.12. USB port

4.13. Microphone socket

4.14. Socket for external AUDIO/VIDEO sources

4.15. Socket for DC 12V adaptor

4.16. UP/ KARAOKE: when playing VCD/DVD, press to move the

selection up / press to activate or turn oﬀ the microphone.

4.17. DOWN: press to move the selection down / when playing DVDs,

press and hold to enter and exit the DVD menu / when playing

VCD2.0, press and hold to turn PBC (Play Back Control) on and oﬀ .

4.18. LEFT/FR/PREV.: press to move the selection to the left. When

playing a disc, press quickly and repeatedly to change the rewind

speed: 2X, 4X, 8X, 16X, 32X. Press and hold to select the previous

track or chapter.

4.19. RIGHT/FF/NEXT: press to move the selection to the right / when

playing a disc, press repeatedly to change the fast forward speed:

2X, 4X, 8X, 16X, 32X. Press and hold to select the next track or

chapter.

4.20. Socket for earphones.

All manuals and user guides at all-guides.com

5. BUTTONS ON THE REMOTE CONTROL

Warnings:

- Do not break, step on or hit the remote control.

- If there is an obstacle between the main unit and the remote control, this

may aﬀ ect how it operates.

- Do not place the remote control under strong light, this may cause it

to not work. .

- Do not use other remote controls at the same time.

- Use in the eﬀ ective range (at 3 metres and at an angle of 60° from the

main unit).

- Change the batteries if it starts to fail.

5.1. UP: moves the selection up in the menu.

5.2. LEFT/FR: in the setup menu, moves the selection to the left / when

Playing, press the F/NO key ﬁ rst and "NUMERIC KEYPAD" will

appear in the corner. Then, press LEFT/FR to go backwards.

5.3. ENTER: press to conﬁ rm the selection.

5.4. DOWN: move the selection down.

5.5. RIGHT/FF: in the setup menu, moves the selection to the right /

when Playing, press F/NO until "NUMERIC KEYPAD" appears. Then

press RIGHT/FF to go forward.

5.6. 1 / PLAY /PAUSE

5.7. 2 / AUDIO: when playing VCDs, it changes the audio channel / when

playing DVDs, it changes the audio language.

5.8. 3 / STOP.

5.9. 4 / SUBTITLE: select the desired subtitle language.

5.10. 7 / MUTE: activate or cancel the sound.

5.11. 8 / MENU: when playing DVDs, enter the DVD menu / in VCD2.0

mode, press to turn PBC (PLAYBACK CONTROL) on and oﬀ .

5.12. SETUP: enter the setup menu.

5.13. 0 / DVD/USB: change the source.

5.14. F/NO (Function/Number): change between function keys and

numeric keypad on the remote control. Pressing this key will cause

the function to appear on the LCD screen.

5.15. VOL- : lower volume.

5.16. VOL+: raise volume.

5.17. 5 / Go to the previous track.

5.18. 6 / Go to the next track.

5.19. LCD ON/OFF: turn on /oﬀ the player's LCD screen.

6. POWER SUPPLY

6.1. Batteries: follow the steps shown in the images.

6.2. AC Adaptor

Characteristics: 100-240V~~50/60Hz, output power (DC OUT): 12V

1.5A (2A).

Ensure the local voltage matches the adaptor voltage.

Connect the adapter (the positive pole in the central socket) to the

player's

12V DC socket and to the mains power.

7. SPECIAL FUNCTIONS

7.1. SELECT OR REMOVE SUBTITLES

Press the "SUBTITLE" button repeatedly to select the language or

remove the subtitles. English subtitles are activated by default but some

DVDs have the subtitles deactivated by default.

7.2. PLAY A SUB-SECTION

When playing a disc, press the "MENU" on the remote control or press

and hold the "DOWN/MENU" button on the player to enter or exit the

DVD menu.

In the menu, select "playing in subsection" and then "ENTER" to enter

the selection screen, press "UP/DOWN/LEFT/RIGHT" to select the sub-

section and press "ENTER" to play.

7.3. NTSC/PAL/AUTO SELECTION

In STOP mode, press "SETUP" to access the Setup Mode. Use the

LEFT/RIGHT keys to select "Preference Setup" and press "ENTER".

Press "UP" or "DOWN" to select "NTSC/PAL/AUTO" and "ENTER" to

conﬁ rm. Press "SETUP" to exit the Setup menu.

Note: if the TV does not show colour after connecting the player, adjust

the output system to the input system of the TV.

7.4. LCD ADJUSTMENT

When the unit is playing, if the colour and brightness of the image are

not good, press STOP and then "SETUP" and access the General Setup.

Press UP/ DOWN to go to "Panel Quality", press "Enter " or "Right" to

enter in Video Panel Setup. Here you can adjust the brightness, contrast,

saturation and tone using the direction keys. Press "SETUP" to exit the

menu.

7.5. SCREEN SAVER

The screen saver function serves to extend the working life of the LCD

screen and to save energy.

Setup: in the Stop mode, press "SETUP" to enter, then "LEFT/ RIGHT"

to access the "General Setup Page". Using the direction keys, select

"Screen saver", press "Enter" or "RIGHT" to access Setup, select "On"

and "ENTER" to conﬁ rm and "SETUP" to exit. The screen saver will be

activated in the stop mode if there is no activity for 5 minutes. Press any

button to activate it.

7.6. PASSWORD SETUP

In Stop mode, press "SETUP" to access the setup menu and "LEFT/

RIGHT" to enter the "Password Setup Page" and "ENTER". Select

p.7

Tabla de Contenido