Installation; Notice - Lacor 1740 Instrucciones De Uso Y Mantenimiento

UNPACKING
1.- Open the large box. Remove all packing materials and protective covering from the unit and
parts. Do not discard the wrapping until you have checked that the blender is working correctly.
2.- Remove the accessories and clean them with soapy water, to eliminate waste produced during
manufacturing.
3.- We recommend maintaining the oven at maximum temperature for 15 minutes to eliminate oils
and greases derived from manufacturing. Any emission of smoke during the first 20 minutes
of use is considered normal.
1.- The power supplied to this unit must comply with electrical requirements on it's label. Damage
or fire may result if the incorrect power is used.
2.- Turn off all switches and unplug the unit should an emergency situation occur.
3.- In the case of a unit being used which has been abused, damaged either accidentally or
intentionally, modified, improperly installed or used in any manner contrary to those included
in the product instructions, guantee will automatically be canceled.
4.- The machine can not be washed or placed into water as it is not a waterproof device. Putting
the unit into water may result in electric shock and will damage the mechanical and electrical
components.
5.- When the oven is not being used, turn all the switches off and switch it off.
6.- Turn the machine off if it appears to be operating in an unusual manner.
7.- Please contact the seller if you lose the operations manual for a replacement.
8.- Please contact the seller if you find other problems not covered in the operation manual.
32

INSTALLATION

NOTICE