Din Rear-Mount; Installation Using The Screw Holes On The Side Of The Unit - Pioneer DEH-P75BT Manual De Instalación

Ocultar thumbs Ver también para DEH-P75BT:

Idiomas disponibles

Installation

DIN Rear-mount

1. Remove the frame. (Fig. 8)

2. Fastening the unit to the factory radio mounting bracket.

(Fig. 9) (Fig. 10)

Factory radio mounting bracket

All manuals and user guides at all-guides.com

Frame

Select a position where the screw holes of the bracket and

the screw holes of the head unit become aligned (are fit-

ted), and tighten the screws at 2 places on each side. Use

either truss screws (5 × 8 mm) or flush surface screws

(5 × 9 mm), depending on the shape of the screw holes in

the bracket

To remove the frame, extend top and

bottom of the frame outwards in

order to unlock it. (When reattaching

the frame, point the side with a

groove downwards and attach it.)

• It becomes easy to remove the

frame if the front panel is released.

Screw

Dashboard or Console

Fig. 8

Fig. 9

Fig. 10

Tabla de Contenido