Kärcher G 2900 E Manual Del Operador página 11

Detergents can only be applied with the black
detergent nozzle.
STEP 1:
Install the black detergent nozzle for deter-
gent application at low pressure.
STEP 2:
Fill a container with Kärcher detergent. Place
the filter end of detergent suction tube into the
container.
CAUTION
This unit has been designed for use with cleaning
detergents recommended by the manufacturer.
The use of other cleaning detergent may affect the
operation of the machine and void the warranty.
Always Use Kärcher Detergent for Best Results
Kärcher biodegradable detergents are specially
formulated to protect the environment and your
pressure washer. The special formula won't clog
the suction tube filter and will protect the internal
parts of the pressure washer for a longer life. For
Kärcher Detergents, check your retailer or visit
our website:
karcher.com/us or karcher.com/ca
WORKING WITH DETERGENTS
Detergents
STEP 3:
With the engine running, pull trigger to operate
unit.
Liquid detergent is drawn into the unit and
mixed with water.
Apply detergent to work area.
Do not allow detergent to dry on surface.
STEP 4:
Always draw fresh water through the deter-
gent suction tube when the cleaning job is
done, to rinse/flush any remaining detergents
from the injection system.
See Cleaning Tips for specific information on
how to clean different surfaces.
CAUTION
Never use:
– Bleach, chlorine products or other corrosive
chemicals
– Liquids containing solvents (i.e., paint thin-
ners, fuel, oils.)
– Tri-sodium phosphate products
– Ammonia products
– Acid-based products
WARNING
The use of these chemical, when used with high
pressure cleaners, can turn into an aerosol. Inhala-
tion of chemicals that have been aerosolized can
be hazardous to health.
These chemicals will harm the unit and damage
the surface being cleaned.
Use of these items will void the warranty.
11