NOTE
►
As soon as you remove the cooking pot from the hob
shown on the display. After approx. one minute, the "E0" disappears and
the appliance switches itself off. If the hob
higher than 60°C, "- H -" will appear on the respective display until the
temperature drops below 60°C.
Timer
You can preselect a time period between 1 and 180 min., after which the hob
will switch off.
1) Begin the cooking procedure (in power or temperature mode) as explained
above.
2) Press the TIMER
The indicator lamp
3) Set the desired time.
If you press the button "+"
press the button "-"
if no entries are made within 5 seconds.
The display
time remaining until switch-off.
After the expiration of the time, the cooking area
You will hear a beep.
Child lock
To prevent unauthorised switching on or setting modification, for instance by
children, this appliance is fitted with a child safety lock.
NOTE
►
You can also the child safety lock as a safe-wipe function:
Before you wipe the buttons with a damp cloth, activate the child safety
lock. This helps avoid any inadvertent activation of buttons.
■
Press the child lock button
hear a signal tone and the child lock
■
To switch the child lock off press and hold the child lock button
for approx. 2 seconds. You will hear a signal tone and the child lock indicator
lamp
NOTE
►
If you activate the child lock while the appliance is working, the appliance
can be switched off but not switched on again.
■
30
GB│IE
│
button. "0" appears on the display
and the TIMER indicator lamp button
, the time is increased by 10 minutes. If you
, the time is decreased by 1 minute. The timer will start,
now alternately shows the set power level/temperature and the
will go out.
, "E0" will be
is still at a temperature
switches off automatically.
to switch the child lock on. You will
indicator lamp will light up.
.
light up.
SIKP 2000 E2