Facility - Create WARM TOWEL Manual Del Usuario

FAC ILIT Y
1. Mark on the wall the 4 holes to be made with the drill. The horizontal separation between
the holes must be 450 mm and vertically 745 mm.
2. Once the holes have been marked, drill the 4 holes of 8 mm diameter.
450 mm
ø8mm
3. Detach the wall brackets as shown in the
image.
Top Screw Front
attachment
5. Fix the internal accessories and the 4
front accessories to the towel rack with
the screws, then attach the decorative
cover so that the screw is not visible.
E NGL I SH
8
CEILING
>150 mm
745 mm
>150 mm
FLOOR
Internal External
accessory accessory
CEILING
FLOOR
4. Insert the plug into the wall hole, then
attach the outer accessory to the wall
brackets and use the wall screw to fix
the accessory properly. Repeat the step
for the rest of the holes.
6. Once the accessories are attached to
the towel rack, insert the internal acces-
sories to the external ones on the wall,
adjust the distance you want and fix the
fixing screws so that it is well secured.
>150 mm
745 mm
>150 mm
Wall
Wall