bintec elmeg be.IP swift Manual De Instrucciones página 4

Thank you for choosing a bintec elmeg product!
You will find the following parts in the scope of delivery:
 be.IP swift

Document for quick start and Safety
 Plug-in power supply unit
 Wall mount
 Stand
 Ethernet cable (CAT5e)
 DSL cable (TAE-RJ45)
If your delivery is not complete, please contact your retailer.
Your be.IP swift is delivered with the software available at the time of manufacture.
It is possible that a newer version of this software is already available. Therefore,
before you make the final configuration, check whether an update is available.
To do this, you can simply click on the Search for Updates tile on the Home page
of the user interface:
If your be.IP swift is not yet connected to the internet, you can also update using a
software image saved on your PC. You can find the corresponding downloads for
your device here:
Attention:
The device may only be operated in an
upright position with the enclosed accessories
(stand or wall bracket). Improper operation
can lead to damage and failure.
Please observe the safety instructions for
installation and operation of the unit.
https://tinyurl.com/mxpwcszk
You can then run the update from the Home > Show
More > Firmware and Configuration menu.