Publicidad
Idiomas disponibles
Idiomas disponibles
• Prior to any maintenance, cleaning and after each use, switch off the appliance and unplug
the mains cable from the socket.
• Repairs to electrical appliances must only be carried out by a qualified electrical technician.
1. Handle
2. Fan blades
3. Protective front grille
4. Feet
5. Anti-slip pad
6. Housing
7. Control switch
CAUTION: Ensure the product is fully assembled before plugging it into a power socket.
1. Remove all parts from packing.
2. Place the fan on a flat, level and stable surface.
3. Plug into 220-240V~50Hz power socket, the appliance will be in standby mode.
• SPEED SETTING:
1. Turn on the control switch and set the desired speed. (1= low speed, 2= medium speed, 3=
high speed).
2. Unplug the fan when not in use.
• Unplug the unit.
• To keep the fan clean, the outer shell may be cleaned with a soft, damp cloth. You may use a
mild detergent if necessary. After cleaning, dry the unit with a soft cloth.
CAUTION: DO NOT let liquid enter the fan.
• DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brusher to clean
the fan. This may cause damage or deterioration to the surface of the fan.
• DO NOT immerse the fan in water.
• Wait until the unit is completely dry before use.
• Store the fan in a cool, dry location when not in use. To prevent dust and dirt build-up, use the
original packing to repack the unit.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous
substances in electric and electronic equipment as well as their waste disposal. The symbol with the
crossed dustbin shown on the package indicates that the product at the end of its service life shall be
collected as separate waste. Therefore, any products that have reached the end of their useful life must
be given to waste disposal centres specialising in separate collection of waste electrical and electronic
equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one
basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled,
treated and disposed of in an environmentally compatible way contributes to preventing possible nega-
tive effects on the environment and health and optimises the recycling and reuse of components making
up the apparatus. Abusive disposal of the product by the user involves application of the administrative
sanctions according to the laws.
PARTS LIST
OPERATING INSTRUCTIONS
MAINTENANCE AND STORAGE
1
6
2
7
3
4
5
E NGLI SH
7
Publicidad
