Publicidad
Idiomas disponibles
Idiomas disponibles
English
Storing the Machine
For periods of 3 months or longer
N
Drain and clean the fuel tank in a
well ventilated area.
N
Dispose of fuel properly in
accordance with local
environmental requirements.
N
Run the engine until the carburetor
is dry – this helps prevent the
carburetor diaphragms sticking
together.
N
Remove, clean and inspect the
cutting attachment.
N
Thoroughly clean the machine –
pay special attention to the cylinder
fins and air filter.
N
Store the machine in a dry and
secure location – out of the reach of
children and other unauthorized
persons.
34
Sharpening Metal Cutting
Blades
N
Use a sharpening file (see "Special
Accessories") to sharpen dull
cutting attachments. In case of
more serious wear or nicks:
Resharpen with a grinder or have
the work done by a dealer – STIHL
recommends a STIHL servicing
dealer.
N
Resharpen frequently, take away as
little material as possible: two or
three strokes of the file are usually
enough.
1
1
2
N
Resharpen the cutters (1) uniformly
– do not alter the contour or the
parent blade (2) in any way.
See cutting attachment packaging for
additional sharpening instructions.
To avoid out-of-balance
N
After resharpening about 5 times,
check the cutting attachment for
out-of-balance on a STIHL balancer
– see "Special Accessories" – or
have it checked by a dealer and re-
balanced as necessary – STIHL
recommends a STIHL servicing
dealer.
Inspections and
Maintenance by Dealer
Spark Arresting Screen in Muffler
Spark arresting screen in muffler (not all
markets)
N
If the engine is down on power,
check the spark arresting screen in
the muffler.
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer.
2
FS 56, FS 56 R, FS 56 C, FS 56 RC
Publicidad
