Technical Data; Specified Conditions Of Use; Residual Risk - Gude GBTS 350 Traducción Del Manual Original

ENGLISH

Technical Data

Concrete cutter
Art. No
Engine
Motor power
Contents
No-load speed
max. Cutting depth
Fuel
2-stroke engine oil
Fuel mixture (Fuel : Oil)
Starting system
Net/gross weight
Tare weight of the machine without cutting disc and accessories and with empty
tank
Tank capacity
max. Diameter
Inside-Diameter
Hole diameter
Outer flange: min. outside-Diameter d
Tightening torque Cutting disc
Width across flats working spindle
Max. speed of the cutting tool
Diameter-working spindle
max. Spindle speed
required water pressure
required water quantity
Noise details
Measured according to DIN EN ISO 19432-1:2020 Attachment B; Uncertainty K = 3 dB (A)
Sound pressure level L Full load
pA
Guaranteed sound power level L
Wear ear protectors.!
Vibration details
Vibration total values (triaxial vector sum) determined according to
DIN EN ISO 19432-1:2020 Attachment C, Uncertainty K = 1,5 m/s
Full load 4800 min Vibration emission value a
-1
Read and understand the operating
instructions before using the appliance.
Familiarise with the control elements
and how to use the appliance properly.Observe all the
safety measures listed in the instructions. Behave
responsibly towards other people.
The operator is responsible for accidents or risks to third
parties.
24
f
9500min
-1
Full load 9500 min
-1
wA
hw(Id)
2

Specified Conditions of Use

The concrete cutter is suitable for working on kerbs,
deep kerbs, concrete surfaces, paving stones and bone
stones.
The unit can operate in wet or dry cutting mode.
Do not use this product in any other way as stated for
normal use. Not observing general regulations in force
and instructions from this manual does not make the
manufacturer liable for damages.

Residual Risk

Even when the device is used properly and all safety
regulations are complied with, there still may be some
residual risks.
Despite the observance of the operating instructions
there still may be some hidden residual risks.
GBTS 350
55559
2-stroke motor
2,9 / 3,9 (kW/PS)
65 cm
3
2800 - 3200 min
-1
130 mm
min. 90 ROZ
JASO FC / ISO EGC
40:1
Recoil starter
16 kg /17 kg
11,5 kg
0,55 l
350 mm
25,4 mm
25,4 mm
98 mm
26 Nm
15 mm
4400 min
-1
M 10
9500 1/min
-1
0,15 - 0,35 mPa
9 - 12 l/min
92,5 dB(A)
116 dB(A)
9,822 m/s²