Cooking Functions; Grill; Air Crisp; Roast - Ninja Foodi EG200 Serie Manual Del Propietário

USING THE NINJA® FOODI® GRILL – CONT .

COOKING FUNCTIONS

Plug in the unit and press the power button to
turn it on.

Grill

1 Place the cooking pot in the unit with the
indent on the pot aligned with the bump on
the main unit. Then place the grill grate in
the pot with the handles facing up. Ensure
the splatter shield is in place, then close the
hood.
2
Press the GRILL button. The default
temperature setting will display. Use the set of
arrows to the left of the display to adjust the
temperature up to MAX.
3
If using the Foodi® Smart Thermometer (not
included with all models), refer to the Using
the Foodi Smart Thermometer section. If not
using the thermometer, use the set of arrows
to the right of the display to adjust the cook
time, in 1-minute increments, up to 30 minutes.
4 Press START/STOP to begin preheating. The
progress bar will begin illuminating. It will
take approximately 10 minutes for the unit to
preheat.
5 When preheating is complete, the unit will
beep and "ADD FOOD" will appear on the
display.
NOTE: If your model has a cooking
thermometer and you would like to use it to
check your food's internal doneness, press the
thermometer button for 2 seconds and
the food's internal temperature will appear
on the screen. Press and hold button again to
exit mode.
6
Open the hood and place ingredients on the
grill grate. Once the hood is closed, cooking
will begin and the timer will start counting
down
12
ninjakitchen.com
7 When cook time is complete, the unit will beep
and END will appear on the display.
NOTE: If batch cooking, refer to page 8 for
instructions.

Air Crisp

1
Place cooking pot in the unit with the indent
on the pot aligned with the bump on the main
unit. Place the crisper basket in the pot. Ensure
the splatter shield is in place, then close the
hood.
2 Press the AIR CRISP button. The default
temperature setting will display. Use the set
of arrows to the left of the display to adjust
the temperature up
to 400°F.
3
If using the Foodi Smart Thermometer (not
included with all models), refer to the Using
the Foodi Smart Thermometer section. If not
using the thermometer, use the set of arrows
to the right of the display to adjust the cook
time, in 1-minute increments, up to 1 hour.
4 Press START/STOP to begin preheating. The
progress bar will begin illuminating. It will
take approximately 3 minutes for the unit to
preheat.
5 When preheating is complete, the unit will beep
and "ADD FOOD" will appear on the display.
NOTE: While preheating is strongly
recommended for best results, you can skip it
by pressing the SKIP PREHEAT button. "ADD
FOOD" will appear on the display. Open the
hood and place ingredients in the crisper
basket. Once the hood is closed, cooking will
begin and the timer will start counting down.
6 Open the hood and place ingredients in the
crisper basket. Once the hood is closed,
cooking will begin and the timer will start
counting down.
NOTE: If you would like to use Foodi® Smart
Thermometer (not included with all models)
to check your food's internal doneness, press
the thermometer button for 2 seconds and
the food's internal temperature will appear
on the screen. Press and hold button again to
exit mode.
7 For best results, we recommend shaking
ingredients frequently. When you open the
hood, the unit will pause. Use silicone-tipped
tongs or oven mitts to shake the basket.
When done, replace the basket and close
the hood. Cooking will automatically resume
after hood is closed.
8 When cook time is complete, the unit will beep
and END will appear on the display.

Roast

1
Place cooking pot in the unit with the indent
on the pot aligned with the bump on the main
unit. Ensure the splatter shield is in place, then
close the hood.
2
Press the ROAST button. The default
temperature setting will display. Use the set
of arrows to the left of the display
to adjust the temperature up to 425°F.
NOTE: Convert traditional oven recipes by
reducing the temperature by 25°F. Check food
frequently to avoid overcooking.
3 If using the Foodi Smart Thermometer (not
included with all models), refer to the Using the
Foodi Smart Thermometer section. If not using
the thermometer, use the set of arrows to the
right of the display to adjust the cook time, in
1-minute increments up to 1 hour and 5-minute
increments from 1 to 4 hours.
4 Press START/STOP to begin preheating. The
progress bar will begin illuminating.
It will take approximately 3 minutes for the
unit to preheat.
NOTE: While preheating is strongly
recommended for best results, you can skip
it by pressing the SKIP PREHEAT button.
"ADD FOOD" will appear on the display. Open
the hood and place ingredients in the cooking
pot. Once the hood is closed, cooking will
begin and the timer will start counting down.
5 When preheating is complete, the unit
will beep and "ADD FOOD" will appear on the
display.
6 Open the hood and place ingredients in the
pot. Once the hood is closed, cooking will
begin and the timer will start counting down.
NOTE: If your model has a cooking
thermometer and you would like to use it to
check your food's internal doneness, press the
thermometer button for 2 seconds and
the food's internal temperature will appear
on the screen. Press and hold button again to
exit mode.
7
When cook time is complete, the unit will
beep and END will appear on the display.
ninjakitchen.com
13