End Of Operation; Product Disposal - UFESA Antek Manual De Instrucciones

Vacuum cleaner Filters: Inlet filter
Before changing the inlet filter make sure the vacuum cleaner is switched off
1. Open the front cover of the vacuum cleaner
2. Remove the filter
3. Replace it with the new one
4. Close the front cover of the vacuum cleaner
Outlet filter ( HEPA 13 or ULTRA 16)
1. In order to replace the outlet filter, open the accessory compartment
2. Press the blocking mechanism of the outlet filter cover and remove it
3. Remove the outlet filter and replace it for a new one. The filter assure circa 1 year of
effective usage
4. Place the outlet filter cover back.
5. Close the accessory compartment
Safbag dust bag disassembly
1. The vacuum cleaner is equipped with safety valve located in chamber of dust container (bag).
It opens automatically in case of total stopping of suction hose or total stopping of equipment
elements connected thereto, as well as in case of overfill of dust bag. After opening the valve
one can hear characteristic "whirr" sound inside the vacuum cleaner.
2. Switch off the vacuum cleaner
3. Pull out the hose
4. Open the front cover
5. Replace the SAFBAG for a new one
6. Close the cover
Do not start cleaning without an installed SAFBAG bag.

End of Operation

1. Switch off the vacuum cleaner by pressing the button on/off
2. Unplug the appliance
3. Wind the cord by pressing the cord rewind button
4. Disconnect the brush or nozzle from the suction tube
5. Disconnect the hose from the vacuum cleaner
6. The vacuum cleaner may be stored vertically or horizontally.

PRODUCT DISPOSAL

This product complies with European Directive 2012/19/EU on electrical and
electronic devices, known as WEEE (Waste Electrical and Electronic Equip-
ment), provides the legal framework applicable in the European Union for the
disposal and reuse of waste electronic and electrical devices. Do not dispose
of this product in the bin, instead going to the electrical and electronic waste
collection centre closest to your home.
16