Finding New Stations - Dab - Sangean DDR-43+ Manual De Instrucciones

Display modes - DAB+ cont.
f. Signal error Displays the signal error for the station
being listened to. The lower the number
the better the signal received.
g. Bit rate/audio type Displays the digital bit rate and audio
type for the current DAB+ radio station.
h. Time Displays the current time.
i Date Displays the current date.

Finding new stations - DAB+

As time passes new stations may become available. To find new
stations proceed as follows:
1. With the unit in DAB+ mode (see page 10) press and release the
Auto-tune button. The display will then show "Local scanning".
The radio will perform a scan of the DAB+ frequencies. As new
stations are found the station counter on the right-hand side of the
display will increase and stations will be added to the list.
2. To carry out a full scan of the entire DAB+ band press and hold the
Auto-tune button for more than 2 seconds and then release.
The display will show "Full scanning". As new stations are found the
station counter on the right-hand side of the display will increase and
stations will be added to the list.
GB
13