Descargar Imprimir esta página

Poly Liner; Paper Bag And Safe Bag For Dust Collection; Longopac ® Bag For Dust Collection; Replacement Of Dust Bags - Nilfisk VHB436N Manual De Instrucciones

Publicidad

Idiomas disponibles

Idiomas disponibles

VHB436N

Poly Liner

The machine can be equipped with a plastic container liner
bag.
In this case, the machine must be equipped with optional
accessories (depressor and grid).
If the bag is not installed or is installed incorrectly, this could
create health risks for persons exposed.

Paper Bag and Safe Bag for dust collection

The machine can be equipped with dust collection bag.
In this case, the machine must be equipped with a specific
container and a cap on the side.
If the bag is not properly installed, it could create health risks
for people exposed.
The safe bag system is suitable to collect toxic dust to
ensure that the user does not come into contact with the
product.
Longopac
bag for dust collection
®
The machine can be equipped with dust collection bag.
In this case, the material is discharged by gravity when the
vacuuming stops. The Longopac® bag can be cut, sealed or
closed to the size required.
If the bag is not properly installed, it could create health risks
for people exposed.

Replacement of dust bags

These operations can only be carried out by trained
and qualified personnel who must wear adequate
clothing, in compliance with the laws in force.
Take care not to raise dust during this operation.
Wear a P3 protective mask.
In case of hazardous and/or harmful dust, use only
US
the bags recommended by the manufacturer (see
"Recommended spare parts").
The bag must only be disposed of by qualified
personnel and in compliance with the laws in force.
Use only original Nilfisk bags.
Only use bags suitable for the machine class you are
using.
C504
Figure 8
Figure 9
[ NOTE ]
Figure 10
DANGER!
DANGER!
DANGER!
Take care not to raise dust during this operation. Wear
a P3 mask and other protective clothing plus protective
gloves (DPI) suited to the hazardous nature of the dust
collected, refer to the laws in force.
How to replace the Poly Liner
Close the inlet by using the relevant cap (if equipped).
Release the dust container.
Remove the dust bag and close it with a clamp, if
necessary.
Place a new bag, taking care to wrap it around the outer
wall of the dust container.
Set the dust container into the machine again.
How to replace the Paper Bag
Close the inlet by using the relevant cap (if equipped).
Release the dust container.
Remove the bag and close it with the relevant cap (1) as
shown in the figure.
Insert a new bag, making sure the bag inlet is sealed.
Set the dust container into the machine again.
How to replace the Safe Bag
Remove and put the vacuum hose in a safe and dust-free
place.
Close the inlet by using the relevant cap (if equipped).
Release the dust container.
Close the Safe Bag by pulling the "guillotine" seal (2).
Close the plastic bag hermetically using the relevant band
(3).
Use the sticky tape (4) to close the bottom of the plastic
bag.
Remove the relevant connection (5) of the bag from the
inlet.
Insert a new safe bag, making sure the vacuum inlet is
well connected to the bag attachment, to grant the sealing.
Wrap the plastic bag around the dust container external
wall.
Place the dust container in the vacuum cleaner.
How to replace the Longopac
Turn the bag full of dust (1) on itself to obtain a section of
coiled bags to be tightened with two clamps (2).
Place the two clamps at a distance of 50 mm between
them, then with a pair of scissors cut between the two
clamps.
Remove the bag full of dust (1) and place the new section
of Longopac
(3).
®
10
DANGER!
Figure 8
Figure 9
Figure 9
®
Figure 10

Publicidad

loading