Descargar Imprimir esta página

Shopseries RK7866 Manual De Instrucciones página 9

Publicidad

Idiomas disponibles

Idiomas disponibles

4˝ BELT / 6˝ DISC SANDER
Table 1
Minimum gage for corda
Volts
Ampere
Rating
120V
240V
Not More
More Than
Than
0
6
6
10
10
12
12
16
California proposition 65:
WARNING: This product may contain lead,
phthalate or other chemicals known to the
State of California to cause cancer, birth defects
and other reproductive harm. Wash your hands
after use.
ADDITIONAL SAFETY WARNING FOR
YOUR TOOL
1. For Your Own Safety Read Instruction Manual
Before Operating Tool
a) Wear eye protection.
b) Support workpiece with miter gage, backstop, or
worktable.
c) Maintain 1/16 in maximum clearance between
table and sanding belt or disc.
d) Avoid kickback by sanding in accordance with the
directional arrows.
2. For belt and disc sanders, the sanding belt is
designed to rotate down towards the table
while the disc rotates both up from the table and
down towards the table, and there's potential
risk of injury to persons if sanding against the
directional arrows on the disc.
SAVE THESE INSTRUCTIONS
Refer to them frequently and use them to instruct others
who may use this tool. If someone borrows this tool,
make sure they have these instructions.
WARNING! Some dust created by power
sanding, sawing, grinding, drilling and other
construction activities contains chemicals known
to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
Total length of cord in feet
25ft.
50ft.
100 ft.
150 ft.
50ft.
100 ft.
200 ft.
300 ft.
AWG
18
16
16
18
16
14
16
16
14
14
12
Not Recommended
1) lead from lead-based paint
2) crystalline silica from bricks and cement and other
masonry products
3) arsenic and chromium from chemically-treated
lumber
Your risk to these exposures varies, depending on how
often you do this type of work. To reduce your exposure
to these chemicals:
1) work in a well ventilated area
14
2) work with approved safety equipment, such as those
12
dust masks that are specifically designed to filter out
microscopic particles.
12
Avoid prolonged contact with dust from power
sanding, sawing, grinding, drilling and other
construction activities. Wear protective clothing and
wash exposed areas with soap and water. Allowing
dust to get into your mouth, eyes, or lay on the skin
may promote absorption of harmful chemicals.
WARNING: Use of this tool can generate and/
or disburse dust, which may cause serious
and permanent respiratory or other injury. Always
use NIOSH/OSHA approved respiratory protection
appropriate for the dust exposure. Direct particles
away from face and body.
ENG
9

Publicidad

loading

Productos relacionados para Shopseries RK7866