afriso AFA 11 Manual De Instrucciones página 76

5.5.5 Relay output
VOLTAGE PEAKS WHEN INDUCTIVE CONSUMERS ARE SWITCHED OFF
When inductive consumers are switched off, this can cause voltage peaks and
can lead to adverse effects on electrical systems and may destroy the switching
contact.
• Use commercially available standard RC combinations such as
0.1 μF/100 Ohm for inductive consumers.
Failure to follow these instructions can result in equipment damage.
The operating state is available via the relay output (voltage-free change-
over contact). The alarm can be transmitted to an additional alarm unit (for
example, ZAG 01).
1. Connect the additional equipment to the terminals "Alarm".
Mounting
NOTICE
25
AFA 11
EN