Kenmore KW3050 Manual De Uso Y Cuidado página 19

INSTALLING & CLEANING CARTRIDGE FILTER
3. Clean the cartridge filter by gently
tapping or brushing dirt off. Cleaning
should not be done indoors in living
areas. For optimal performance, a new
filter is recommended.
INSTALLING & CLEANING FOAM WET FILTER
INSTALLING FOAM WET FILTER
1. Verify that the power cord is
disconnected from the outlet.
2. Remove the power head and place in an
upside-down position. Follow instructions
to remove the cartridge filter on page
18.
3. Carefully slide the foam wet filter down
over the filter cage making sure the
cage is completely covered.
4. Place the power head onto the collection
tank.
4. Install cleaned or new filters as above in
steps 2-4 of Installing Cartridge Filter.
CLEANING FOAM WET FILTER
1. With the removed power head in an
upside-down position, carefully remove
the foam wet filter.
2. Use a mild soap and water solution to
wash the foam wet filter and rinse with
clean water.
3. Allow the wet filter to air dry for 24
hours before installing onto the filter
cage.
- 19 -