Feellife Air Angel Manual De Usuario página 27

Conducted 3 V/m
RF 150 kHz
IEC to 80
61000 MHz
-4-6
Radiated
RF IEC
61000 3 V/m
-4-3 80 MHz to
2.5 GHz
NOTE 1: At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations.
Electromagnetic propagation is affected by absorption and reflection
from structures, objects and people.
Portable and mobile RF
communications equipment should
be used no closer to any part of this
device, including cables, than the
recommended separation distance
3 V/m calculated from the equation
applicable to the frequency of the
transmitter.
Recommended separation distance
d = 1.2
d = 1.2
d = 2.3
where P is the maximum output
power rating of the transmitter
3 V/m in watts (W) according to the
transmitter manufacturer and d is the
recommended separation distance in
meters (m).
Field strengths from fixed RF
transmitters, as determined by an
electromagnetic site survey,*2) should
be less than the compliance level in
each frequency range.*3) Interference
may occur in the vicinity of equipment
marked with the following symbol:
80 MHz to 800 MHz
800 MHz to 2.5 GHz