Cleaning And Maintenance; Problems And Solutions - Pulmic FENIX Manual De Uso

PULMIC FENIX
4. CE DECLARATION OF CONFORMITY
In compliance with the provisions of the Machinery Directive (2006/42 / CEE)
and industry law 21/1992, the manufacturer declares that this equipment has
been designed and tested in such a way that it complies with the Health and
Hygiene regulations that apply to it. are enforceable. Harmonized technical
standards ISO 19932-1: 2013; ISO 4254-6: 2009; ISO 16119-1: 2013; UNE 68095-
2: 1997; UNE-EN 61960: 2004; 2006/66 / CEE; 93 / 44EEC.
All materials and components have passed the corresponding quality tests
to be assembled and put into service safely.
In Valencia, January 2020.

5. CLEANING AND MAINTENANCE

• At the end of spraying (with the machine off), raise it to 45⁰ and when
the trigger is activated the excess liquid will return into the tank.
• Always remove the batteries from the machine.
• Activate the sprayer with clean water for at least 500 cm3 or 5 min.
• Clean the entire machine with a dry cloth. Never immerse the head in water.
• Clean the two tank filters when you finish working.
Watch the product maintenance video through
the following link or QR:
www.tiny.cc/maintenancefenix

6. PROBLEMS AND SOLUTIONS

Watch the videos of the main repairs through
the following link or QR:
www.tiny.cc/troubleshootingfenix
— 8 —
www.gruposanz.es