If there are leaks in the duct connections
If the cables are properly connected
If the power is connected
If the inlet and outlet hoses are properly installed
All packaging and printing materials must be removed from
the dishwasher.
HOW TO DRAIN EXCESS WATER FROM HOSES
If the sink is 1000 mm higher than the floor, excess water in the hoses
cannot be drained directly into the sink. Excess water will need to be
drained from the hoses to a suitable container lower than the sink.
4. CONTROL PANEL
Power switch: To turn on/off the power supply.
Program key-press: Press the key to scroll through the wash
cycles. The corresponding program light will be ON to indicate
which WASH CYCLE has been selected.
Delay button: The START DELAY will allow you to delay the
start time of any cycle automatically up to 24hours.
Program indicator light:When you select a washing program,
the corresponding light will display.
Digital display: To display the running time remain,
Malfunction codes and delay time.
59