Please check if your model incorporates the 3 in 1 function. Otherwise we
suggest not using this type of detergent.
If you cancel the function, please fill in the salt and rinse aid compartments. Adjust the
hardness level to the highest position for at least 3 normal no-load cycles.
Subsequently, re-adjust the water hardness according to the conditions of your region.
Note: The 3 in 1 wash cycle is an additional function, must be used with other
programs (Intensive, Eco and Light).
6.
LOADING THE DISHWASHER BASKETS
NOTES:
• Loading the household dishwasher to the capacity indicated by the manufacturer
will contribute to save energy.
• Use only glassware and porcelain dishes provided by the manufacturer with the
"Dishwasher Resistant" label.
• Use a detergent characterized as "mild" or "non-aggressive".
• Remove the glassware and cutlery as soon as possible after completion of the
washing programme in order to avoid damage to them.
• In case of not following loading instructions detailed in this manual, may damage
the dishes and the appliance itself. Water and energy consumption may be
affected as well.
• It is not necessary to rinse the dishes with water. Manual pre-rinsing will increase
water and energy consumption. The manufacturer does not recommend rinsing
the dishes.
To get the best performance from your dishwasher, follow these loading guidelines.
NOTE: Orientative images. The trays may vary depending on the model
purchased.
INSTRUCTIONS BEFORE LOADING BASKETS
Scrape off any large amount of leftover food. It is not necessary to rinse the dishes
with water. Place objects in the dishwasher as follows:
1. Objects such as cups, glasses, pots, etc. are placed face down.
2. Curved objects, or those with holes, must be inclined so that the water can drain.
3. Place the tableware securely so that it cannot tip over.
4. Position the dish in such a way that it does not prevent the spray arms from turning
during washing.
5. Very small items should not be washed in the dishwasher, as they could fall off
easily.
64