4．1 Overall Cleaning; 4．2 Cleaning The Glass Shelf; 4．3 How To Take Out The Pearl Cotton Block Inside Humidification Shelf Components - CORBERO CCM188520NFXMAD Manual Del Usuario

4. Maintenance and care of the appliance
4.1 Overall cleaning
Dusts behind the refrigerator and on the ground shall be timely cleaned to improve the cooling effect and
energy saving.
Check the door gasket regularly to make sure there are no debris. Clean the door gasket with a soft cloth
dampened with soapy water or diluted detergent.
The interior of the refrigerator should be cleaned regularly to avoid odor.
Please turn off the power before cleaning interior, remove all foods, drinks ,shelves, drawers, etc.
Use a soft cloth or sponge to clean the inside of the refrigerator, with two tablespoons of baking soda and
a quart of warm water. Then rinse with water and wipe clean. After cleaning, open the door and let it dry
naturally before turning on the power.
For areas that are difficult to clean in the refrigerator (such as narrow sandwiches, gaps or corners), it is
recommended to wipe them regularly with a soft rag, soft brush, etc. and when necessary, combined with
some auxiliary tools (such as thin sticks) to ensure no contaminants or bacterials accumulation in these
areas.
Do not use soap, detergent, scrub powder, spray cleaner, etc., as these may cause odors in the interior of
the refrigerator or contaminated food.
Clean the bottle frame, shelves and drawers with a soft cloth dampened with soapy water or diluted
detergent. Dry with a soft cloth or dry naturally.
Wipe the outer surface of the refrigerator with a soft cloth dampened with soapy water, detergent, etc., and
then wipe dry.
Do not use hard brushes, clean steel balls, wire brushes, abrasives
(such as toothpastes), organic solvents (such as alcohol, acetone,
banana oil, etc.), boiling water, acid or alkaline items, which may
damage the fridge surface and interior. Boiling water and organic
solvents such as benzene may deform or damage plastic parts.
Do not rinse directly with water or other liquids during cleaning to
avoid short circuits or affect electrical insulation after immersion.
Please unplug the refrigerator for defrost and cleaning.
4.2 Cleaning the glass shelf
Remove the drawer on the glass shelf;
Lift up the front of glass shelf(about 60°), and then pull out;
Remove the glass shelf and clean as needed;
The reverse operation is for installation of glass shelf.
4.3 How to take out the pearl cotton block inside
humidification shelf components
The pearl cotton is used to separate the humidity-
conditioning shelf from the moisture-proof cover (to
prevent the moisture-proof cover from falling off during
transportation). After unpacking, the user needs to remove
this pearl cotton from the moisture-retaining shelf
assembly. Removal method: grip both sides of the pearl
cotton by hand and pulls out hard until the pearl cotton
completely leaves the moisturizing shelf assembly.
15