Publicidad
Idiomas disponibles
Idiomas disponibles
Steak
180°C
Pork
200°C
Vegetable
140°C
Dual Touchscreen Control Panel Indicators
- ADD FOOD
•
When using the [SYNC] function the [ADD FOOD] indicator will
illuminate when it is time for the food to be added to the second
basket.
MUTE
•
The MUTE indicator will illuminate when the MUTE function has
been activated
- Temperature and Time
•
Alternating display of the temperature and the remaining cooking
time during operation.
Operating indicators
•
Runs successively when in operation and flashes when the
operation has been interrupted.
PREPARATION AND USE
Preparation
•
Place the appliance on a stable, horizontal, and level surface, do
10
not place the appliance on non-heat-resistant surfaces.
•
Plug the appliance in an earthed socket, it will beep once and the
15
ON/STANDBY icon will illuminate.
•
Touch the ON/STANDBY icon. The appliance will beep once, the
10
control panel will illuminate and the Basket 1 icon will flash
repeatedly.
Pre-heating the appliance
Generally, it is not always necessary to preheat the Aerofryer
however if your recipe does require pre-heating follow these steps
below.
•
If needed, place the crisping trays in the baskets.
•
Place the empty baskets in the Aerofryer.
•
Manually set the pre-heating time and temperature to 80°C for 5
minutes by the using the Temperature Up/Down and the Time
Up/Down icons.
•
Press [START/PAUSE] to start the operation.
•
The appliance will start pre-heating. The "In Operation" indicators
will run and the temperature and the remaining time will be
shown in the display.
•
When the operation is complete the appliance will beep 5 times
and the ON// STANDBY icon will illuminate and the appliance is
ready for use.
USE
Instruction manual
EN
7
Publicidad
