OTROS:
1) Haga que su producto sea reparado por una persona cualificada.
2) Este producto eléctrico está de acuerdo con los requisitos de seguridad pertinentes. Las reparaciones
sólo deben ser realizadas por personas cualificadas que utilicen piezas de repuesto originales; De lo
contrario esto puede resultar un peligro considerable para el usuario.
3) Por favor entre en contacto con la tienda en la que usted compró el producto para los servicios des-
pués de la venta si tiene alguna duda.
Ceiling fan
INSTALLATION INSTRUCTIONS
English
Warning symbols
READ THE INSTRUCTIONS
CAUTION
LAMP
PROTECTIVE EARTH
GENERAL:
CAUTION: We recommend the installation be performed by a qualified electrician who can check the
strenth of the supportive ceiling members and make proper electrical connections.
All wiring must be in accordance with national and local electrical codes and the ceiling fan must be
grounded as a precaution against posible electrical shock.
An all-pole disconector with isolating distance of 3mm must be incorporated in the fixed wiring in accor-
dance with the national wiring rules.
The product is in accordance with safety standards into force. Repairs should be exclusively performed
by qualified technicians using original spare parts. Any breach of this instruction may be particularly
dangerous for the users.
WARNING: Please be sure pivot pin and split pin are in place and both setscrews on downrod are tighte-
ned securely before operation.
To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
IMPORTANT SAFETY PRECAUTIONS:
1) Check if the electrical specifications of the appliance are compatible with your installation.
2) Unauthorized use or technical modification to the appliance can lead to danger to life and health.
3) This appliance is not intended for use by persons(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
4) This appliance is for indoor use only except moist or wet room.
5) Means for disconnection must be incorporated in the fixed wiring in accordance with wiring rules into force.
6) Before wiring the paddle fan, turn off the electric power supply at the main fuse box or main circuit
breaker and leave it off until the installation is complete.
7) The outlet box and support structure must be securely mounted an capable of reliably supporting a
mínimum of 34,5 kgs. Use only metallic outlet boxes.
8) Do not install paddle fan less tan 2,3 between floor and lowest edge of fan blades. Check hanging
location in order to assure adequate clearance with adjacent walls, furnitures, etc..
9) All wiring must be in accordance with the National Electrical Code and local electrical codes. Electrical
installation should be performed by a qualified lecensed electrician.
05