Descargar Imprimir esta página

Product Description; Technical Features Of E-Bike; Pedal-Assist Mode Overview; Speed And Control Elements - Btwin E-LD500 Instrucciones De Uso

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 46

PRODUCT DESCRIPTION

Technical features of e-bike

A
E
A
LED rear lighting
Battery and controller
B
C
Harness + connectors: Brakes/Control screen
D
LED front lighting
E
Motor
F
Pedalling sensor

Pedal-assist mode overview

The electrically assisted bike can be used with or without assistance by pressing the ON/OFF button. Always make sure the battery
is properly inserted and locked. The electrical assistance will only work if you pedal. The assistance is cut off as soon as one of
the two brake levers is operated or the speed exceeds 25 km/h. It will automatically start again below 23 km/h. In order to preserve
battery life, the bike is equipped with a «power» limiter which limits assistance when the motor is under heavy stress. During inten-
sive use and in exceptional weather conditions, the pedal-assist mode may cut out to safeguard the system.
C
D
B
F
6

SPEED AND CONTROL ELEMENTS

Display screen and function

10
2
5
3
4
Power assistance mode (0-1-2-3):
«0» no power assistance.
1
«1» is the default power assistance mode.
Each mode corresponds to the maximum assistance speeds set out below:
Mode
Average battery life*
ON/OFF button:
2
Switch the electrically-assisted bicycle on and off by holding the button down for a few seconds.
«+» button:
3
Step up to the higher power assistance mode by briefly pressing the button
Switch to «walk assist» mode by holding the button down for a few seconds.
«-» button:
4
Step down to the lower assistance mode
Lighting button
5
The lighting on the bicycle can be switched on and off by briefly pressing the button
Go to the settings by holding the button down for a few seconds
6
Speed indicator**
ODO: Records the total distance travelled. It cannot be reset to zero.
7
TRIP: Records the partial distance travelled. It can be reset to zero by pressing the «-» button for 10 seconds.
TRIPtoGO: Remaining distance that may be covered with the power assistance mode.
6
POWER
KM / H
NORMAL
ECO
11
9
ODO
TRIP
to GO
KM
1
12 7
8
0
1
2
/
115 km
80 km
7
3
60 km

Publicidad

loading