Description Of Components; Function Description - Temper KCB-240 Manual De Instrucciones

KCB 240-ST
Battery Crimping Tool
Sealing ring of cylinder: 1 set
Sealing ring of safety valve. 1 set

2. Description of components:

Parts No. Description
1 Blade holder For fixing blade
2 Blade For cutting blade
3 Pin For locking/unlocking cutting blade.
4 Handle For bring
Showing the data (crimping times, electricity
5 LCD
capacity, error information)
6 Keyboard For power switch, function switch, LED light switch
7 Limited screw For prevent head from dropping or popping.
8 LED indicator For lighting
9 Trigger For operating or retracting the piston in case of
Function
incorrect operation.
10 Battery For supplying power, rechargeable Li-ion（18V）.

Function description

3.
MCU –automatically detect the pressure during operation and provide
Security protect, shut off the motor and reset automatically after
operation.
Auto reset- Release the pressure automatically, retract the piston to the
starting position when reached the max output.
One key control- press the trigger to start working, half loosing the trigger
means stop forcing pressure, loosing fully means piston return to the
original position.
The unit is equipped with a double piston pump which is characterized
by a rapid approach of the die towards the connector and a slow crimping
motion
The head can be smoothly turned by 350° around the longitudinal axis
in order to gain better access to tight corners and other difficult working
areas.
Suspend—finish working or withdraw the hand from the trigger or any
accident happened, the device inside of the tool can stop power supply.
One significant sound will be heard and a red display flashes if any error
occurs or lower power being.( Ref. table 1)
Per time pressing on the trigger, the LED will lighting for 20 s.
High-performances Li-ion battery in strong power supply, No discharge
memory effect., Ultra lower power consumption standby design keep the
tool 6 months storage, meanwhile over discharge device prolong the life
span of the battery.
A temperature sensor makes the tool stop working automatically when
the temperature over 60℃ under long time working, the fault signal
sounds, it means the toll can't continue work until the temperature reduce
www.grupotemper.com