Publicidad
Idiomas disponibles
Idiomas disponibles
6.5
Force Adjustments
6.5.1
Press and hold SET, it displays "P1".
6.5.2
Press UP once, it displays "P2",
6.5.3
Press SET once again , it will show the current situation. Press UP to
increase the force one degree or press DOWN to decrease one degree.
Maximum degree is "F9", minimum is "F1".
6.5.4
Press SET.to confirm. The default setting is "F5".
6.5.5 After finishing all the setting, please check the forse to make safe.
6.6
Photo Beam
6.6.1
Press and hold SET, it displays "P1".
6.6.2
Press UP twice, it displays "P3".
6.6.3
Press SET to show current situation. Press UP once it displays "H1", the
photo beam is enable. Press DOWN once, it displays "H0", the photo beam
is disabled. Press SET to confirm and quit.
6.6.4
If you do not use photo beam device, please make sure it displays "HO" to
close this function.
6.7
Auto - Close ON/OFF
6.7.1
Press and hold SET, it displays "P1".
6.7.2
Press UP three times, it displays "P4".
6.7.3
Press SET to show current situation. Press UP to increase the auto-close one
minute or press DOWN to decrease one minute. Maximum degree is "b9",
minimum is "b0". Press SET. To confirm.
6.7.4 The default setting is "b0", "b0" show auto-close is off. This function
works when the door reaches the open position.
CORRECT PRODUCT DISPOSAL (electrical and electronic waste)
(Applicable to EU countries and countries with differentiated collection systems)
At the end of the product's life cycle, make sure that it is disposed of correctly by
differentiating it from other common waste and depositing it at a clean point. This avoids
the possible negative effects that incorrect handling of waste could have on people and
the environment.
Aprimatic Doors reserves the right to make any modifications or variations it deems necessary to its
products and/or this manual without any obligation to give prior notice.
You can download the Declaration of Conformity at:
https://www.aprimatic.es/documentacion/documentaciontecnica/declaracion-de-conformidad
16
Publicidad
