Publicidad
Idiomas disponibles
Idiomas disponibles
7 . Owner's Guide
7.1
7.1.1
At the first time of using the door, please test the driving system to see if it
move well. (Test method: unlock the trolley, pull and push the door by
hand)
7.1.2
Connected with the appropriate power and socket by professionals, and
connected the earthing wire earth.
7.1.3
Using the transmitters in your sight. Do not stand or walk under a moving door.
The transmitters should be out of reaching of children.
7.1.4
Make sure the door out off fire, moisture, electromagnetism and some other
places.
7.1.5
Check al least twice a years to make sure the door is properly balanced an
that all working part are in good condition. Adjust the tensile force of chain.
Add suitable amount of lubricant to active.
7.2
7.2.1
Problem
1
7.2.2 The chain is noisy.
7.2.3 The motor does not work.
7.2.4 After setting open and close
positions, the motor does
not work.
7.2.5 The door can't be closed
7.2.6 The wall button works well,
but the transmitter doesn't
work.
7.2.7 Transmitter distance is
too short.
Attention in use
Examination Guide
Causes
The chain is too loose.
The socket is not well
connect or the fuse is broken.
The screws of fixing the hall
components are loose or
program mistakes
Photo beam function
works
No transmitter learning or
transmitter battery is power
off.
The transmitter battery is
nearly power off.
17
Solution
Adjust nut-M8 referring to
3.2.C.
Check the socket or replace
the fuse
Tighten the screws or
resetting open and close
positions.
Cancel the photo beam
function, referring to 6.6
Code referring to 6.4 or
change new transmitter
battery.
Change new battery.
Publicidad
