Publicidad
Idiomas disponibles
Idiomas disponibles
RDM (Remote Device Management)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally
along existing DMX cabling. Check the DMX controller's User Manual or with the manufacturer, as not all DMX controllers
have this capability. The LOGIC CVS supports RDM protocol that allows feedback to make changes to menu map options.
RDM Chart
Refer to the LOGIC CVS product page on
GET SET
Category
Network
Management
RDM
Information
Product
Information
DMX Setup
Sensors
Control
LOGIC CVS QRG Rev. 1
QUICK REFERENCE GUIDE
www.iluminarc.com
RDM Parameter IDs (Slot 21–22)
DISC_UNIQUE_BRANCH
DISC_MUTE
DISC_UN_MUTE
QUEUED_MESSAGE
SUPPORTED_PARAMETERS
PARAMETER_DESCRIPTION
DEVICE_INFO
DEVICE_MODEL_DESCRIPTION 0x0080
MANUFACTURER_LABEL
DEVICE_LABEL
SOFTWARE_VERSION_LABEL 0x00C0
FACTORY_DEFAULTS
DMX_PERSONALITY
DMX_PERSONALITY_DESCRIPTION 0x00E1
DMX_START_ADDRESS
SENSOR_DEFINITION
SENSOR_VALUE
IDENTIFY_DEVICE
for the latest RDM chart.
Value Required Detail
0x0001
0x0002
0x0003
0x0020
IDENTIFY_DEVICE,
DEVICE_INFO,
SOFTWARE_VERSION_LABEL,
SUPPORTED_PARAMETERS,
DMX_START_ADDRESS,
DEVICE_MODEL_DESCRIPTION,
0x0050
MANUFACTURER_LABEL,
DEVICE_LABEL,
DMX_PERSONALITY,
PERSONALITY_DESCRIPTION,
SENSOR_DEFINITION,
SENSOR_VALUE
0x0051
1. RDM Protocol Version: V1.0;
2. Device_Model_ID: 0x1734
3. Product Category Defines:
0x0060
4. Software Version ID
5. DMX512 Footprint;
6. DMX512 Personality
7. DMX512 Start Address
8. Sensor Count
LOGICCVS
0x0081
ILUMINARC
0x0082
LOGICCVS
V_._ _
FACTORY_DEFAULTS: yes
0x00E0
9 personalities
RED / 1CH
GREEN / 1CH
BLUE / 1CH
WHITE / 1CH
TW / 2CH
RGB / 3CH
RGBW / 4CH
RGBW+D / 5CH
FULL / 10CH
0x00F0
1–503
0x0200
0.) Product Temperature__°C
0x0201
-20 °C to 100 °C
0x1000
Identify State: Off
PRODUCT_CATEGORY_FIXTURE
_FIXED;
EN
4
Publicidad
