Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
If any abnormality occurs during use, please check and correct the
following:
Condition
Display is blank when power is on.
Measurement incomplete or
abnormally low or high values
displayed.
Measurements are different from
those typically measured by
physician or every measurement
reading is different.
All manuals and user guides at all-guides.com
Correction
Check and correct the polarity of
the installed batteries. Reinstall or
replace batteries.
Review and follow 'Applying Your
Blood Pressure Cuff' and 'Taking
Your Blood Pressure Reading'
sections. Replace the batteries.
Remember, blood pressure
readings are influenced by physical
and mental conditions and/or even
the time of day. Daily measurement
recordings should be interpreted
by your physician.
16
Error Codes
Err 0
No pulse is detected
Err 1
Inflation rate is too low
Err 2
Systolic reading unattainable
Err 3
Cuff pressure is too high
Err 4
Diastolic pressure is outside of operation range
Err 5
Cuff deflated too fast
Err 6
Cuff deflated too slow
Err 7
Systolic pressure is outside of operation range
Err 8
Overall pressure is outside of operation range
Err 9
Cuff is unable to inflate to the necessary pressure level
Care and Maintenance
1. Disconnect the cuff tubing from the monitor prior to storing.
2. Only use a soft, dry cloth to clean your blood pressure monitor.
3. Avoid using any types of liquids on the monitor or cuff.
4. Do not store the unit where it will be exposed to direct sunlight, dust or
humidity.
5. Avoid extreme temperatures.
6. Never disassemble the monitor or cuff.
7. Dropping or subjecting your blood pressure monitor to strong shocks
should be avoided.
17
Publicidad
