Battery Installation/Replacement; Setting The Date/Time - MABIS Healthcare 04-267-001 Manual De Instrucciones

Battery Installation/Replacement

Replace the batteries when the Low Battery symbol
appears on the display, Fig. 1, or when the display
remains blank when the POWER Button is pressed.
To change the batteries:
1. Open the battery cover off, Fig. 2.
2. Making sure the battery polarity is correct, install
four AA alkaline batteries, Fig. 3.
3. Close the battery cover, Fig. 4.
NOTE: It is recommended to remove the batteries if the unit will not be
used for an extended period of time.
Fig. 2
All manuals and user guides at all-guides.com
Fig. 1
Fig. 3
8
1. Press the Time Set Button
Time Adjustment mode. The blinking Month will
display, Fig. 1.
2. Press the 'M' Button to change.
3. Press the Time Set Button
4. The blinking Date, Fig. 2, followed by Year,
Hour and Minutes will display. Repeat steps
2 and 3 to adjust the date/time setting.
5. Your unit is now ready to take a reading, or
press the Start Button to turn the unit off, Fig. 3.
Fig. 4

Setting the Date/Time

to enter into the
to confirm entry.
Press the Button
blinking Month
changing Month
confirm the entry
9
Fig. 1
Fig. 2
Fig. 3