Taking Your Blood Pressure Reading - MABIS Healthcare 04-267-001 Manual De Instrucciones

Taking Your Blood Pressure Reading

Proceed only after reading the previous sections of this manual.
Remember! Remain still; do not talk during the measurement.
1 Position the monitor on a flat, stable surface with
the digital display in view. Insert the cuff tubing
connector into the left side of the monitor, Fig. 1.
2. Rest your (left) elbow on a solid surface with
your palm facing upward. Elevate your arm so
that the cuff is at the same level as your heart,
Fig. 2. Relax your (left) hand.
3. Press the POWER Button. The unit will run a
self-test, Fig. 3.
4. After the self-test, the last reading will briefly
appear on the display, Fig. 4.
5. Using your right hand, squeeze and release the
inflation bulb at a steady pace. The inflation
pressure must be approximately 30 mmHg
above your normal systolic pressure. Continue
to steadily inflate the cuff to the sufficient level,
Fig. 5.
Fig. 3
All manuals and user guides at all-guides.com
Fig. 1
Fig. 2
Fig. 4 Fig. 5
12
6. Upon achieving the proper inflation level,
release the pressure on the bulb.
7. The pressure in the cuff will automatically
begin to decrease. The display will
represent the deflation, Fig. 6.
8. Upon completion, your blood pressure
(systolic and diastolic) measurement and
pulse reading will display, Fig. 7.
9. Press the air release valve until the cuff
pressure is released.
10. Your reading will be automatically stored in
memory.
11. To conserve energy, press the POWER
Button to turn the unit off. Otherwise, the
unit will automatically shut off after
approximately 2 minutes.
12. Disconnect the cuff tubing from the monitor
prior to storing.
Fig. 6
Fig. 7
13
Systolic
Diastolic
Pulse