HOW TO USE
Always check whether a label with ironing instructions is attached to an
article to be ironed. Follow these instructions in all cases.
Turn the temperature control dial round to set the appropriate
temperature indicated in ironing instructions or in fabric label.
LABEL
.
..
...
• Insert the main plug into the wall socket. The indicator light will
turn on.
• When the indicator light goes out you may start ironing.
• If you set the temperature control to lower setting after ironing
at a high temperature. it is not recommended to iron before the
pilot light switches on again.
WATER TANK FILLING
• Unplug the iron before filling the water tank.
• Hold the steam iron in horizontal position.
• Slowly pour water through the water inlet.
TYPE OF TEXTILE
Do not iron this article
Synthetics, Nylon, Acrylics, Polyester, Rayon
Wool, Silk
Cotton, Linen