Steam Ironing; Dry Ironing - Thulos TH-PV2603 Manual De Instrucciones

• Do not fill higher than mark on the water tank, in order to avoid
spilling out of water.
NOTE: Use only normal distilled water.
NOTE: If you empty the water tank after the steam iron has cooled
down, set the steam iron upright position on its heel rest, plug it in and
set the temperature control dial to the maximum position, heat for 2
minutes. Unplug the steam iron from the power supply.
SPRAYING
As long as there is enough water in the water tank, you may use the
spray button at any temperature setting during steam or dry ironing.
Press the spray button several times to activate the pump while you are
ironing.

STEAM IRONING

Set the temperature control dial to the ".." or "..." position.
Set the variable steam control to the desired position.
CAUTION: Avoid coming in contact with ejected steam.

DRY IRONING

• The steam iron can be used on the dry setting with or without
water in the water tank, it is best to avoid having the water tank
full while dry ironing.
• Turn the variable steam control to the minimum position.
• Select the setting on the temperature control dial best suited for
the fabric to be ironed.