Assembly - Blumfeldt Fiamme Camin Manual De Instrucciones

• Do not place flammable materials within 1 meter around the fireplace. The
fireplace should be at least 1 meter away from other objects or furniture
made of flammable material.
• Make sure that the installation site has a fire-proof surface.
• Avoid drafts or movements that cause drafts in the room in which the
fireplace is operated.
• The fireplace must not be operated in the direct vicinity of an air
conditioning or ventilation system.
• The use of the fireplace is not recommended in rooms with constantly high
humidity.
• When using decorative ceramic wood or stones, it is essential to ensure
that no decorative elements are directly in the flame. The decoration
may only be placed around the burner slot and must consist of non-
combustible material.
• When replacing the decoration, make sure that it has cooled down.
Note: During operation, the decoration material and the pane can reach a
temperature of 90-140 °C. With the sliding device it is even up to 200 °C.

ASSEMBLY

Note: The top, bottom and back plate of the ethanol fireplace are packed
separately. Assemble the ethanol fireplace as described below.
1
Mount the base to the
main body by 6 screws
(M6).
2
Mount the top to the
body by 9 screws (M6).
3
Assembly the back
plate to the top from
back by 7 screws (M4).
EN
29