Basic Use - Miracle-Ear LINK Remote Mic AV Manual Del Usuario

Overview
Overview
1. Power Button
• Powers on and off the Miracle-EarLINK
Remote Mic AV
2. Status Indicator LED
• Identifies the operational state of the
Miracle-EarLINK
LED
Off
Slow Pulsing Green
Slow Pulsing Red
Solid Red
3. Microphone
• Picks up speaker's voice during use
4. MicroUSB Jack
• Recharges via USB-to-microUSB cable
5. Clip
• Affixes Miracle-EarLINK
clothing or lanyard
Tip: Stream Volume can be adjusted via the
Miracle-Ear app, the Miracle-EarLINK
®
and/or hearing aid user controls. Review your hearing
aid operation manual or contact your Hearing Care
Professional for details on your particular system setup.
6
™
Remote Mic AV
™
OPERATIONAL STATE
Power is off
Power is on
Low battery condition
Possible fault condition
Remote Mic AV to
™
Remote AV
™

Basic Use

1. To turn on the
Miracle-EarLINK Remote
™
Mic AV, press the power
button for 2 seconds and
release when the green
LED appears.
2. Ensure your hearing aids are
powered on.
• Note: Prior to streaming audio for the first
time, your hearing aids will need to be paired
to the Miracle-EarLINK
to Pairing with Hearing Aids on page 12.
3. To start audio streaming,
• Open the Miracle-Ear
Streaming from Accessories screen.
• Refer to Start/Stop Audio Streaming
on page 15 for additional options.
4. To adjust the stream volume, use the Miracle-Ear
app, the 2.4 GHz Remote and/or hearing aid
user controls.
Basic Use
1
Remote Mic AV. Refer
™
app and select Start
®
7