Pairing With Hearing Aids - Miracle-Ear LINK Remote Mic AV Manual Del Usuario

Pairing with Hearing Aids

Pairing with Hearing Aids
For the Miracle-EarLINK
with your hearing aid(s), you must first pair the
Miracle-EarLINK Remote Mic AV with each hearing
™
aid. You only need to perform this action one time,
as they should automatically recognize each other
when both are powered on and within wireless
operating range.*
To pair the Miracle-EarLINK
your hearing aid(s):
1. Ensure your hearing aids are not connected to
nearby Bluetooth
• Disable Bluetooth on your mobile phone.
• Power off any other nearby Miracle-EarLINK
Accessories.
2. Power off, then power on your hearing aids.
• Note: For a CROS hearing aid system,
power off both your hearing aid and CROS
transmitter. Power on only your hearing
aid, ensuring the CROS transmitter remains
powered off.
3. Place your hearing aids within 6 inches (15 cm)
of the Miracle-EarLINK
4. While the green LED is slowly pulsing, double-
click the power button. The LED
status indicator alternately blinks red and blue.
12
Remote Mic AV to interact
™
Remote Mic AV with
™
devices. To do this,
®
Remote Mic AV.
™
5. For a set of hearing aids:
First LED
blink
™
For a single hearing aid:
6.
LED blink
*Typical operating range is up to 20 meters (~60 feet). Operational range may
be reduced by environmental factors, such as obstructions, interference and
human body positioning. Larger operational distances are achievable, though
audio quality and connectivity may decrease.
Pairing with Hearing Aids
Second Pairing Result
LED blink
Both hearing aids
paired
Only one hearing
aid paired
No hearing aids
n/a
paired
Pairing Result
Successful
Unsuccessful Repeat steps 1 – 4 and 6
x2
Next Step
Complete
Repeat steps
1 – 5
Repeat steps
1 – 5
Next Step
Complete
13