Preparation For Operation; Working With The Unit - MSW -CBC-180W-10A Manual De Instrucciones

DISPLAY DESCRIPTION
A. Slow charging 12V
B. Fast charging 12V
C. Winter mode
D. Charging 6V
E. Damaged battery
F. Wiring is incorrectly connected or short circuit protection has tripped
G. Battery voltage value
H. Battery charge indicator (1 dash - 25 %)

3.2. Preparation for operation

POSITIONING OF THE UNIT
The ambient temperature must not exceed 40°C and ambient humidity should not exceed 85%. Keep the unit
away from any hot surfaces. Always operate the unit on a level, stable, clean, fireproof and dry surface and
out of the reach of children and persons of impaired mental, sensory and intellectual functions. Place the unit
in such a way that the mains plug can be reached at any time. Ensure that the power supply to the unit
corresponds to that specified on the identification plate!

3.3. Working with the unit

1. Connect the red clamp wire to the positive (+) post of the battery.
2. Connect the black clamp wire to the negative (-) terminal of the battery.
3. Connect the charger to the power supply.
4. The charger automatically recognizes the type, voltage and capacity of the connected battery and
adjusts its operation mode.
5. For 12V batteries, the user can choose from three charging modes: fast, slow or winter mode. The mode
is selected by pressing the mode selection button.
6. If one of the errors occurs, an icon (E) or (G) will appear on the screen depending on the cause.
7. Reasons for an error occurring while the unit is in use:
a) short circuit,
b) defective battery,
c) incorrectly connected charger cables to the battery (reversed polarity).
CHARGE TIME
Battery charging time depends on battery discharge and capacity.