Publicidad
Idiomas disponibles
Idiomas disponibles
Complete the installation
ONLY FOR RECIRCULATING VERSION
Air deflector installation
• Assemble the air deflector with the duct cover bracket with
4 assembly screws provided as shown.
• Measure from the bottom of the air deflector to the bottom
of the hood outlet, as shown:
Wall
outlet
•
Cut the duct at the measured size.
•
Uninstall the air deflector removing the 4 assembly screws.
•
Slip the duct onto the bottom of the deflector.
•
Place the assembled deflector and duct over the exhaust outlet
from the hood.
•
Place charcoal filters. See "Maintenance" section.
8
Dimension
to measure
Electrical connection
WARNING
ELECTRICAL SHOCK HAZARD.
WARNING
DISCONNECT POWER BEFORE SERVICING.
REPLACE ALL PARTS AND PANELS BEFORE OPERATING.
FAILURE TO DO SO CAN RESULT IN DEATH OR
ELECTRICAL SHOCK.
1 Disconnect power.
2 Remove terminal box cover.
3 Remove the knockout in the terminal box cover and install
a UL listed or CSA approved
A
A.
Knockout
B.
Junction box cover
4
Run home power supply cable through strain relief, into
terminal box.
A
C
D
E
A.
Home power supply cable
B.
UL listed or CSA approved
strain relief
C.
Black wires
5
Use UL listed wire connectors and connect black wires
(C) together.
6
Use UL listed wire connectors and connect white wires (E)
together.
WARNING
ELECTRICAL SHOCK HAZARD.
WARNING
ELECTRICALLY GROUND BLOWER.
CONNECT GROUND WIRE TO GREEN AND YELLOW GROUND
WIRE IN TERMINAL BOX. FAILURE TO DO SO CAN RESULT IN
DEATH OR ELECTRICAL SHOCK.
7 Connect green (or bare) ground wire from home power
supply to yellow-green ground wire (F) in terminal box using UL
listed wire connectors.
8 Tighten strain relief screw.
9 Install terminal box cover.
10 Check that all light bulbs are secure in their sockets.
11 Reconnect power.
⁄
" strain relief.
1
2
B
B
F
D.
UL listed wire connectors
E.
White wires
F.
Green (or bare) and
yellow-green ground wires
Publicidad
